公司簡介目錄連絡我們生產設備熱電偶製作教學FEP管封館技術支援首頁
我們的產品
熱電偶、測溫電阻體
熱電偶接線盒 & 端子座
表面測溫棒
熱電偶補償導線
特殊熱電偶補償導線
陶瓷 / 薄膜型電阻測溫扺抗體
生產設備
鎧材剝頭專用機 HAN-128
銅帶機 TC-06
甩直機
簡易氣動夾具
氫氧焊機 FP-103A
氣動壓接機 AM-10
冷端壓著機 CLX-Y01
電動裁線機 S-100
金屬網剝皮機 HAN-200
半自動剝線機 LL-305
電動繞線機 HAN-55
魔帶結束機 BW-1020
電線架SC系列
銘牌刻字機
熱電偶製作教學
生產示範
配件
保護管
不銹鋼SUS304端子
不锈鋼管
快速接頭
伸縮線
工業儀表配件
表面測溫棒系列
電熱相關
SCR相位控制器
彈筒型電熱管

紅外線陶瓷發熱器

耐熱母插頭
750℃高溫耐熱電線
儀表
REACH 溫度控制器
數字掌上型溫度錶

紅外線溫度計
1326-1327-1327K

溫度校正器 / 溫度表

溫度傳送器

伽利略彩球溫度計

THYRISTOR POWER REGULATOR

Mounting Dimensions

Product Features:

◎The SCR unit attached with high speed fuse in order to prevent the damage of SCR due to the
   shortage current (di/dt).
◎The unit is packagecd onstruction with less dimension, easy for installation and wiring
◎The causes of malfuntion can be indicated by individual LED lamp, easy for trouble shooting.
◎Less non-linearity output provides accurate control of temperature.
◎High quality and high technical productions with no electrical interference.
Operation Enviroment:
 ◎Ambient temperature:-10~45℃,Relative humidity: Max 90%
Installation: 
◎The SCR unit will produce heat itself during operation, piease errect it
   upward accrding to the instruction.
◎The panel must be upward ventilated for hot air. we recommand 
   mountiong a ventilating fan in the control panel.
◎Do nor install the unit in the space with high temperature and poor 
   ventilating, Do not operate the unit exceed 70% of rated output in
   case of above mentioned poor ambient  conditions.
Load Test:
◎The SCR unit will not well funtioned in case of less output load(0.6 Amp).
   Please connect the load at least 0.6 Amp.

Comparation of control mode and output wave:

LED lamp indication and trouble shooting:

Pos.No Color Indicating condition Causes of malfunction Treament and trouble shooting
PL
(L1)
 Green 
No indication of power
supply lamp
Lamp lighting means
normal
 @No power of Aux. source.
@Malfuntion on PCB board.
@Over temperature of SCR.

@Check the Aux.power supply.
@Repair or replace the PCB board.
@Check the SER temperature.
IN
(L2)
 Green
No indication of input lamp

Lamp lighting means normal
@No output signal from TIC
@Output signal from TIC is 
    reverse.
@Max value of internal output
    or External VR is zero setted.

@Check the output signal of TIC.
@Reverse the connect wiring of 
    TIC.
@Check the setting of internal
    and external VR output.
OUT
(L3)
 Red
No indication of output lamp.
Phase angle control--
lamp lighting means normal
Aero crossing control--
lamp blinks means normal
@No output signal from TIC or 
    reverse the connecting of 
    output signal.
@Lamp IN lighting and lamp 
   OUT no indication.
@Lamp OUT lighting but no
    current output.

@Check the lamp IN,No indication
    means no output signal from 
    TIC or reverse wired.
@Repair or replace the PCB board
    in case of the nalfunction from
    the board.
@Check main power supply or 
    fuse.
ERR
(L4)
 Yellow
Over-temp of SCR lamp light
Lamp lighting means SCR
over temp

@Malfunction or dirt blocking 
    on the ventilation fan. 
@High ambient temperature or 
    poor ventilation.

@Replace or clean the dirt of the
    impeller.
@Improve the ventilation
    condition.





敏揚企業股份有限公司
台灣省台北市南港區南港路三段99號5樓
電話: 886-2-27882828　傳真: 886-2-27882727
網址: http://www.aone.com.tw 　電子信箱: lingling@aone.com.tw