|
|
(一)Description and specification |
|
Please order the thyristor power regulator according to the
following specification |
MODE:  PHASE
ANGLE |
|
(Phase angle control mode, suitable for constant resistence load) |
 PHASE
ANGLE TF |
|
(Phase angle control mode, suitable for teansformer resistence
load) |
 PHASE
ANGLE TFCT |
|
(Phase angle control mode, suitable for constant current control
load) |
 ZERO
CROSSING |
| (Zero crossing control mode, suitable for
constant resistence load) |
| MAIN SOURCE: Main
power source (Available within the range) |
|
AUX SOURCE: Aux,source
(For the type phase TF & TFCT,the Aux soruce must be the same
as |
|
power source) |
|
INPUT: Input signal |
| CURRENT: Rated current |
|
NO: SERIES No. |
|
(二)Adjustable functions |
| BIAS .....................
Output adjustment of basic voltage.(6mA) |
| MAX
.................... Max
output adjustment.(0~100%) |
|
(三)Selection of input signal |
| 4~20mA, MANUAL.......................... Jump P1 and
S1 |
| 2~10VDC, 0~12VDC, 1~5VDC........ Jump p1 and S2 |
|
(四)Description of indicating lamp |
| PL(L1):
Indication of power supply (Lighting when Aux,power switched
on) |
| IN(L2):
Indication of transfer signal from TIC (Lamp illuminating acc, to
the output signal of TIC) |
| OUT(L3):
Output signal transfering (Lamp illuminating acc. to the output) |
| ERR(L4):
Malfunction indication (Lamp lighting in case of SCR over temp) |
|
| Examples
of connecting circuit lit: |
Catalog
.jpg)
.jpg)
.jpg)
.jpg)